OZProfile Channels are high strength in-line open sections coated with the innovative DuraGal^® Platinum hot-dip zinc aluminium coating, providing a smooth surface with a uniform coating thickness, purpose designed to perform in general, and construction applications. This fully bonded coating with a minimum average coating mass of 75g/m2, is applied in accordance with AS/NZS 4791:2006*

For further technical information download TS100 from the link provided or an OZProfile brochure

Additional Info
Specification: OneSteel TS100
Grade: C400L0 & C450L0
Size Range: 75x40 CC to 300x90 CC
Thickness Range: 4.0mm to 8.0mm
Standard Length: 9.0m, 12.0m
Surface Finish: DuraGal^® Platinum (In-Line, Hot-dip zinc aluminium.)

With their prepared surface finish, OZProfiles are supplied ready to use - so now there’s no longer any need to spend time and money on shot blasting, wire brush cleaning or priming after fabrication.

Available in Angles, Channels and Flats, OZProfiles feature the innovative DuraGal^® Platinum In-line, Hot-dip zinc aluminium surface protection coating.

Surface Protection
OZProfiles coated with DuraGal^® Platinum now offers double the barrier against corrosion but still demonstrates the same processing capability end-users have grown to trust. DuraGal^® Platinum's zinc aluminium coating applied in-line has an equivalent durablility of a 225g/m² zinc coating, in moderate and severe environments.

OZProfiles surface finish is smooth, clean, free from oil, mill scale, rust and dirt making our range of Angles, Channels, and Flats ready to use, so there is no need to waste time and money on shot blasting, wire brush cleaning or priming after fabrication.

* Note: Zinc aluminium coating classes are not currently referenced in AS/NZS 4791, hot-dip galvanized (zinc) coatings on ferrous open sections applied by an in-line process.