|
|
|
DuraGal Angles are high strength cold formed structural sections that are In-line Hot-dip galvanized over a prepared metal surface, to produce a fully bonded coating with a minimum average coating mass of 100g/m2, in accordance with AS/NZS 4791:1999 ILG100. The zinc surface then has a surface conversion coating applied. All equal angles larger than 50mmx50mm are coated with a clear polymer over the conversion coat.
For information on section & tensile properties and chemical composition for DuraGal Equal Angles, select the appropriate link from the right hand menu.
Additional Info
Specification: OneSteel TS100
Grade: C350L0, C400L0 & C450L0
Size Range: 30x30 CA to 150x150 CA
Thickness Range: 2.5mm to 8.0mm
Standard Length: 6.0m, 9.0m, 12.0m
Surface Finish: DuraGal (In-Line, Hot-dip Galvanized)
DuraGal® Profiles are a member of the DuraGal Family of
Products® that include DuraGal rectangular, square and
circular tubing.
With their prepared surface finish, DuraGal® Profiles are
supplied ready to use - so now there’s no longer any need
to spend time and money on shot blasting, wire brush
cleaning or priming after fabrication.
Available in Angles, Channels and Flats, DuraGal® Profiles
feature the DuraGal® In-line, Hot-dip Galvanized surface
protection coating.
DuraGal® Profiles are a convenient, time saving way to
work with steel, and where equivalent strength and
corrosion protection is required, the total cost of using
DuraGal® Profiles may be less than using a traditional hot
rolled black product. When you add the convenience of
a prepared surface to the list of built-in features, it’s easy
to see why the market is demanding DuraGal® Profiles. |
